Calm Study · Features · Pricing · Blog · Free Tools

How to Calculate Your GPA: Scale, Formula and Examples

· 8 min read

To calculate your GPA, turn each letter grade into grade points, multiply by the class’s credits, add those up, and divide by your total credits. A 4-credit A- and a 3-credit B come to 23.8 points over 7 credits, which is a 3.40. That’s the whole formula. Where people go wrong is in the details: which scale their college uses, which grades count, and how to fold a new term into a cumulative GPA. This guide works through each one, with examples you can check against your own transcript.

What GPA means

GPA stands for grade point average. Each letter grade is worth a number of grade points, and your GPA is the average of those points, weighted by how many credits each class carries. Nearly every US college uses one, and it usually runs from 0 to 4.0.

Your transcript normally shows two. There’s a term GPA for each semester or quarter, and a cumulative GPA across everything you’ve taken at that college. Registrars often call grade points multiplied by credits “quality points”, and the credits that count towards GPA “GPA hours”. Those are the numbers to look for if you want to check the maths.

The 4.0 GPA scale

This is the most common version. The percentages are typical cut-offs, and plenty of courses set their own, so your syllabus decides the letter and your registrar decides the points.

LetterGrade pointsTypical percentage
A+4.0, or 4.33 at some colleges97-100
A4.093-96
A-3.790-92
B+3.387-89
B3.083-86
B-2.780-82
C+2.377-79
C2.073-76
C-1.770-72
D+1.367-69
D1.063-66
D-0.760-62
F0Below 60

Not every college uses the same scale

The differences look small, but they add up over a degree. Columbia’s School of Professional Studies gives an A+ 4.33 and an A- 3.67, and has no D+ or D- at all. Many other colleges give an A+ the same 4.0 as an A, so nobody can finish above 4.0. Some leave plus and minus grades out of the GPA entirely.

MIT is the best-known outlier. It uses a 5.0 scale, with A worth 5, B worth 4, C worth 3, D worth 2 and F worth 0, and it rounds GPA to one decimal place. So if you’re comparing your GPA with a friend’s at another college, or filling in an application that asks for a 4.0 equivalent, find out how each college counts before you compare.

Try this: Search your college’s name plus “registrar grade points”. The official table is usually a single page, and it settles every question on this list.

How to calculate your GPA, step by step

Do one term at a time. Here’s a typical 14-credit semester.

  • Write down each class with its credits and letter grade.
  • Look up the grade points for each letter on your college’s scale.
  • Multiply grade points by credits for each class. These are your quality points.
  • Add up the quality points, then add up the credits.
  • Divide total quality points by total credits.
ClassCreditsGradePointsQuality points
Biology4A-3.714.8
Calculus4B3.012.0
Psychology3A4.012.0
Writing3B+3.39.9
Total1448.7

Why credits matter so much

In that example, 48.7 divided by 14 is 3.479, so the term GPA is a 3.48. The two 4-credit classes did more to set it than the two 3-credit ones, because the credits are the weights. Registrars differ on rounding, so if your transcript is a hundredth away from your own sum, that’s probably why.

Weighting cuts both ways. Add a 1-credit lab that you fail, and the GPA drops to 3.25. Now imagine the B in Calculus had been an F instead. You lose 12 quality points but keep all 14 credits, and the GPA falls to 2.62. It’s the same letter both times, with very different damage.

How to calculate cumulative GPA

Your cumulative GPA uses the same formula across every term. The quickest way is to start from your transcript’s running totals, rather than from scratch.

Say your transcript shows a 3.20 cumulative GPA over 45 credits. Multiply them and you have 144 quality points banked. Add the semester above, 48.7 points over 14 credits, and you get 192.7 points over 59 credits. Divide, and your new cumulative GPA is 3.27.

The mistake to avoid is averaging your term GPAs. A 3.0 term with 12 credits and a 4.0 term with 18 credits doesn’t make a 3.5. It makes a 3.6, because the bigger term carries more weight: 36 points plus 72 points, over 30 credits.

Try this: Use the “GPA hours” on your transcript, not the “earned hours”. They differ once you’ve passed a class pass/fail or transferred credits in, and only GPA hours belong in the sum.

What counts towards GPA, and what doesn’t

This is where most hand calculations go wrong. These are the usual rules, though each one varies by college.

On your transcriptIn your GPA?Worth knowing
FYes, as 0 pointsIts credits count in full, which is why one F hurts so much
P (pass)NoYou get the credits without any grade points
W (withdrawal)NoIt still counts as attempted credits for financial aid
I (incomplete)Not yetIf the work isn’t finished by the deadline, it often turns into an F
A retaken classIt dependsSome colleges replace the old grade, and others count both
Transfer creditUsually notThe credits come across, but the grades tend to stay behind

How retakes change the sum

Retakes vary more than anything else. At UC Davis, undergraduates can repeat a class they got a D+ or below in, and the new grade replaces the old one in their GPA for up to 16 units. After that, both grades count. MIT goes the other way: a repeated subject counts in your GPA every time you take it.

Where the grade is replaced, take the old attempt out of your sum completely, credits and points both, then add the new grade. Where grades are averaged, keep both attempts in. If you can’t tell which applies to you, the registrar will know.

Federal aid has its own rules about retakes, which matter if you’re thinking of retaking a class you already passed. Our guide to failing a class goes through those.

Weighted and unweighted GPA

If you’ve seen a GPA above 4.0, it was probably a weighted high school GPA, where honours and AP classes get an extra point, so an A counts as 5.0. College GPAs aren’t weighted like that. A harder class may carry more credits, and that’s the only extra weight it gets.

Your college GPA also starts from nothing. Your high school GPA got you in, but it doesn’t carry over onto your college transcript.

Converting percentages and UK marks

There’s no single official way to turn a percentage into a GPA. The fair method is to turn each class’s percentage into the letter your college would have given, then use the grade points for that letter. If you average the percentages first and convert the average at the end, you’ll get a number that won’t match what a registrar would calculate.

UK degrees use classes, but a few UK universities report a GPA as well. Oxford Brookes gives a mark of 70 to 74 an A worth 4.0, 75 or more an A+ worth 4.5, and 60 to 64 a B worth 3.0. It then caps the final GPA at 4.00, as a compromise between the usual international maximum and UK marking, which it says spreads out more at the very top. If an application abroad asks for your GPA, check whether your university has an official conversion before you make one up.

Working backwards from a target GPA

To find the GPA you need next term, multiply your target by the total credits you’ll have afterwards, subtract the points you already have, and divide by next term’s credits.

Carrying on from the example, you have 192.7 points over 59 credits and want a 3.40 after another 15 credits. 3.40 × 74 is 251.6. Take away 192.7 and you need 58.9 points from 15 credits, which is a 3.93, close to straight As. Spread over two terms, you’d need about a 3.67 in each, an A- average, which is a far more realistic plan.

Try this: Put your classes into our free GPA calculator. It does this sum for you and keeps your classes in your browser for next term.

Keep going

Common questions

How do you calculate GPA?

Multiply each class’s grade points by its credits, add the results, and divide by your total credits. On a 4.0 scale, a 3-credit A (12 points) and a 4-credit B (12 points) give 24 points over 7 credits, which is a 3.43.

What is the GPA scale?

Most US colleges use a 4.0 scale: A is 4.0, A- is 3.7, B+ is 3.3, B is 3.0, and so on down to F at 0. Some give an A+ 4.33, and MIT uses a 5.0 scale.

How do I calculate my cumulative GPA?

Multiply your current cumulative GPA by your GPA hours to get your total quality points. Add each new term’s points and credits to those totals, then divide the new points total by the new credit total.

What is a 3.5 GPA in letter grades?

It sits halfway between a B+ (3.3) and an A- (3.7). That could be an even mix of As and Bs, or mostly B+ and A- grades.

Does a W affect your GPA?

No. A W carries no grade points, and its credits stay out of your GPA. It does still appear on your transcript, and it counts as attempted credits when your college checks your progress for federal aid.

What GPA do I need to graduate?

Usually a 2.0 cumulative, which is a C average, though some majors and programs set a higher bar. Your college catalogue has the exact rule.

Calm Study

Once you know what next term needs to look like, Calm Study can help with the work itself. Upload your class notes and it writes flashcards, quizzes and a mock exam for each class, then plans which to do each day in the run-up to your exams.

Try Calm Study for free

References

  1. Columbia University School of Professional Studies. Academic policies and procedures: grades. https://sps.columbia.edu/students/student-advising-academic-success/academic-policies-procedures/grades
  2. MIT Registrar’s Office. Calculating GPA: what you need to know. https://registrar.mit.edu/classes-grades-evaluations/grades/calculating-gpa
  3. UC Davis Office of the University Registrar. Internal transcript guide: repeat notations. https://registrar.ucdavis.edu/faculty-staff/itg/repeat
  4. Oxford Brookes University. Grade Point Average. https://www.brookes.ac.uk/students/your-studies/grade-point-average
  5. US Department of Education (2026). 2026-2027 Federal Student Aid Handbook, Volume 1, Chapter 1: School-determined requirements. https://fsapartners.ed.gov/knowledge-center/fsa-handbook/2026-2027/vol1/ch1-school-determined-requirements

Keep reading